HOW TO PLUG & POUR

Serving Draught Beer Was Never This Easy

    Replacing a Keg

    UNLOCK THE KEG

    Ensure that the keg is empty. Flick the lock switch up and make sure the red indicator light stops blinking and is turned off.

      REMOVE THE KEG

      Remove the dome and the tube from tap. Take out the keg.

        PRESS ORANGE BUTTON

        Use a keg that has been precooled for at least 16 hours. Use your thumb to press the orange button at the bottom of the keg until you hear a ‘click’.

          CONNECT THE KEG

          Open the tap lid. Insert a pre-cooled keg into the appliance. Make sure that the keg’s tube is correctly inserted and aligned to the orange groove. Push the black part of the spout into the tap and close the tap lid. Remove the red cap.

            PLACE THE DOME

            Place the dome over the appliance to keep the keg cold.

              LOCK THE KEG

              Flick the switch down to lock the keg in the appliance. The indicator light should turn solid green.

                CHECK THE TEMPERATURE

                Use the gauge to make sure the beer has reached the right temperature before pouring.