EXPERIENCING ISSUES WITH LIGHT NOT TURNING GREEN?
1. REALIGN THE KEG
WHEN THE LIGHT IS SOLID/FLASHING RED, FLICK THE LOCK SWITCH UP TO OPEN THE LOCKING MECHANISM.
REALIGN THE KEG IN THE BLADE BY TWISTING IT A LITTLE BIT. FLICK THE LOCK SWITCH DOWN AGAIN. WHEN THE LIGHT TURNS GREEN THE BLADE IS READY FOR USE.
2. CHECK IF THE KEG IS OK
CHECK THE CAP OF THE KEG. BOTH HOLES SHOULD BE PERFECTLY ALIGNED. IF THIS IS NOT THE CASE, TRY TO MANUALLY ALIGN THE HOLES
IF THE PREVIOUS STEP DID NOT WORK, CHECK FOR ANY AIR LEAKS IN THE TUBE OR TRY INSTALLING A NEW KEG
3. CHECK THE LOCKING MECHANISM
FLICK THE LOCK SWITCH UP AND WAIT UNTIL THE LIGHT IS OFF. REMOVE THE KEG. WITH THE KEG REMOVED, FLICK THE LOCK SWITCH DOWN AND AT THE SAME TIME TURN OFF THE APPLIANCE.
WHEN LOOKING DOWN IN THE COOLING BOWL, THE KEG LOCKING MECHANISM SHOULD BE EXTENDED OUTWARDS ON BOTH SIDES. IF THIS IS NOT THE CASE CONTACT YOUR LOCAL SERVICE ORGANISATION.
LOOK INSIDE THE COOLING BOWL AND CHECK IF THE BLACK RUBBER NOZZLES ARE STILL ATTACHED. IF MISSING, CHECK IF THE RUBBER NOZZLE IS LYING IN THE COOLING BOWL.
THE RUBBER NOZZLE CAN EASILY BE PLACED BACK BY PRESSING IT ON THE METAL PART. IF THERE IS A MISSING RUBBER NOZZLE CONTACT YOUR LOCAL SERVICE ORGANISATION.